..水力旋流器 High efficiency Hydrocyclone 设备详细信息介绍:
一、适用范围及优势 Scope of application and advantages:
TX-水力旋流器主要用于各种金属矿、非金属矿浆的脱泥作业。TX-..脱泥旋流器在吸收国外..成果的基础上,经过几年的实践,确定..水力旋流器的主要构件的比例及协调性,设计生产的..脱泥旋流器具有脱泥效率高,有用矿物损失少,节省用户成本,提高生产效率的优点。
TX-hydrocyclone is mainly used for the desliming operation of various kinds of metal ore and nonmetal pulp. TX- efficient cyclowash based on absorption of foreign outstanding achievement, after several years of practice, determine the proportion and coordination of main components, hydrocyclone, efficient cyclowash design production with desliming high efficiency, less loss of useful minerals, saving the user cost, improve production efficiency
二、材质 Texture of material:
水力流器内衬耐磨层根据不同的物料特性和工作条件可采用刚玉、高耐磨橡胶、复合陶瓷、陶瓷复合材料、聚氨酯等材质。也可根据现场需要,针对旋流器结构中各部件的耐磨性要求,在一台旋流器的不同部位采用不同材质的耐磨衬层,以增加旋流器的整体使用寿命。同时更长时间的保持旋流器内部流道的形状和尺寸,从而保持稳定的分级效率和分级精度。
The hydrocyclone lining wear layer according to different material properties and working conditions with corundum, high wear-resistant rubber, composite ceramics, ceramic composite materials, such as polyurethane material. Also according to the practical needs, the wear resistance of each component of hydrocyclone structure requirements, different parts of the cyclone in a different material wear resistant lining layer, the service life of the cyclone to increase overall. At the same time longer to keep the shape and size of the internal flow cyclone, and maintain the stability of the classification precision and efficiency
三、工作原理 Working principle:
水力旋流器作为一种常见的分离分级设备,其工作原理是离心沉降,当待分离的两相(或三相)混合液以一定压力从给矿口进入旋流器后,产生强烈的三维椭圆型强旋转剪切旋流流动。由于粗颗粒(或重相)与细颗粒(或轻相)之间存在粒度差(或密度差),在离心力、向心力、浮力、流体阻力等作用下大部分粗颗粒(或重相)按螺旋轨迹下旋到底部,作为沉砂从沉砂口排出。细颗粒给矿(轻相)在中心形成内螺旋矿流向上运动,作为溢流从溢流从溢流管排出。
As a common separation and classification device, the working principle of centrifugal hydrocyclone is centrifugal sedimentation. When the separated two-phase (or three-phase) mixture enters a swirler at a certain pressure at a certain pressure, a strong three-dimensional elliptical strong swirling shear swirling flow occurs. Because of the coarse particles (or phase) and fine particles (or light) between the size difference (or density), the centrifugal force, centripetal force, buoyancy, fluid resistance under the action of the majority of coarse particles (or phase) of screw trajectory by backspin to the bottom, as the sand discharged from the sand outlet. Fine particles in the ore (light phase) in the center of the formation of the spiral ore flow upward movement, as a overflow from the overflow from the overflow pipe.
四、技术参数 Technical parameters:
旋流器规格
内径
internal diameter
.大给料粒度
Maximum feed grain size
入口压力
Inlet pressure
处理能力
processing capacity
分离粒度
Separation granularity
100
100
1
0.05-0.4
1-12
10-100
125
125
1
0.05-0.4
8-15
20-100
150
150
1.5
0.05-0.4
11-20
30-74
200
200
2
0.05-0.4
25-40
30-100
250
250
3
0.05-0.4
40-65
40-100
300
300
5
0.05-0.4
45-90
40-150
350
350
6
0.03-0.4
60-105
50-150
500
500
10
0.03-0.4
140-220
74-200
610
610
12
0.03-0.4
200-260
74-200
660
660
13
0.03-0.4
250-360
74-220
750
750
16
0.03-0.4
400-550
74-250
Cyclone specification
(mm)
(mm)
(MPa)
(m 3/h)
(μm)
我公司还可根据客户的要求定制.符合客户生产条件和要求的产品。
Our company can also customize the products that meet the requirements and requirements of the customer according to the requirements of the customer